TMT and HYSD bars both have a wide variety of iron percentages while maintaining high quality. TMT bars are suitable for usage in large concrete structures and concrete constructions based on the seacoast where excessive stickiness may be an issue because of their higher strength and sharp resistance. HYSD is made by twisting the rod after it has been cast once again. This causes face blights, and the yield quality of the rod may suffer as a result.
The following are some of the significant distinctions between TMT and HYSD bars:
TMT bars are more corrosion resistant than HYSD bars due to the rapid-fire quenching and tempering utilized in the manufacturing process. Due to the ductile microstructure at the middle and hard crystalline exterior face of TMT steel, it has a stronger external sub caste than HYSD.TMT bars, unlike HYSD bars, are not subjected to quenching or torsion throughout the manufacturing process, making them a highly reliable option. Mild steel bars were previously used for limited scope development due to low yielding quality, however, this has changed recently. Twisted bars of high yielding quality were developed to support large structural scale development. However, as the size of development grew, TMT bars were introduced, which promised superior quality, and resistance to erosion, and the fire was easily bendable and had a greater adaptability limit overall. TMT bars provide the construction a longer life since the TMT steel does not react with the solid, forming rust that takes up more space and causes splits in the solid.TMT bars have the greatest benefit in that they can easily carry more weight than HYSD bars. Because one TMT bar has a higher load-bearing capacity than one HYSD bar, fewer TMT bars are needed to form a structure, lowering construction costs.
5 Reasons to prefer TMT bars over HYSD bars to ensure a Safer Home:
- TMT bars, unlike HYSD bars, do not have any surface defects. As a result, TMT bars are an excellent choice for critical infrastructure building due to their increased strength.
- TMT bars have a higher yield strength than HYSD bars, according to popular belief. TMT bars are one of the most used materials for building in seismically active areas.
- Mild steel bars were previously employed for small-scale projects due to their low yielding strength, however high yielding strength deformed bars were later produced for reinforcing large-scale constructions.
- Due to the obvious ductile microstructure at the core and the hard crystalline exterior surface of TMT steel, it has a stronger external layer than HYSD bars.
- They can be employed in a variety of projects, including concrete structures, bridges, flyovers, dams, thermal and hydropower plants, industrial structures, high-rise buildings, metro platforms, and rapid transportation systems.
HYSD Bars vs TMT Bars: Know The Key Differences
- HYSD stands for ‘High Yielding Strength Deformed’ in its full form. They are high-strength construction steel bars with better strength due to spiral ribs created by mechanical twisting of the cold bar. Despite this, the cold twisting method produces a product with a lot of residual stress, distortion, and surface flaws.
Types of HYSD bars:
- Torsed/twisted steel (TOR Steel Bars)
- Cold Twisted Deformed Steel Bars (CTD Steel Bars).
- TMT stands for ‘Thermo Mechanical Treatment,’ which is the method used to make them. They’re made by rolling hot steel wires through water and then bending them. TMT bars have a hard outer surface and a softcore on the inside, which aids in corrosion resistance and improves weldability.
Types of TMT bars:
- Fe 415 grade
- Fe 500 grade
- Fe 550 grade
- Fe 600 grade
Reach Us for TMT Bars in India
Omsairam Steels & Alloys Pvt Ltd uses its own MS Castings to produce MS Billets in its melting division and UMA 500 TMX Steel Bars in its rolling division. Omsairam Steels & Alloys Pvt Ltd primarily supplies high-end MS Billets as a raw material for its rolling division. Omsairam Steels & Alloy Pvt Ltd creates MS Billets with an optimal chemical composition, resulting in high-quality steel bars with high strength and ductility, thanks to a state-of-the-art Quality Control Unit driven by the most modern analyser.
- +91 9822958857
- omsairam.steel@rediffmail.com